How to make a paper hat from the pirate and the cylinder with your hands

Doing fancy dress? Think how to make a helmet from paper Tricorn pirate hat for a witch or cowboy? Use step by step instructions and master classes that will help you to know how to make a hat out of paper. Such simple home-hats will be a good alternative to purchase costumes, and will look not less bright and original.

Hats out of paper with their hands

Paper hats with their hands – an easy way to spice up a costume. Using glue and scissors easily make authentic Mexican sombrero, pirate’s hat, an elegant cylinder, or the cap for the snowman. The famous blue hat know-nothings, with fabric will make recognizable the easiest costume of that fabulous hero. How to make a hat out of cardboard, paper and other additional materials will tell you the instruction of making each hat.


Learn how to make pirate hat from paper. To implement the plan we need:

  • black paper (1 sheet of A3);
  • hat elastic band;
  • scissors;
  • the awl;
  • adhesive;
  • white paper;
  • black marker or pen.

Manual how to make a pirate hat out of paper:

  1. On black paper draw a square with sides equal to the length of a short edge of A3 sheet. Cut.
  2. Rounds the corners, stopping square in a circle.
  3. White sheet, double-folded in half (along the length).
  4. Do fringe – folded strip is often cut across without touching the bottom edge.
  5. Unfold the paper, cut along the folds.
  6. Tighten up the scissors or a pencil fringe on each white paper strip.
  7. Gently priladiv curly strips to the black circle, glue them around the entire circumference so that the bent edge of the fringe facing up.
  8. The circumference of the eye have (note) three equidistant from each other points.
  9. From one mark to the other making three folds that should form an equilateral triangle.
  10. Semicircular bend the brim upwards.
  11. On the principle of fringe cut/make two white feathers, added them to the hat (box side curved in shape of hat).
  12. To the front of the hat cut out white skull and crossbones, paint and glue on the second field curved in shape.
  13. Pierce the sides of the hat holes with an awl.
  14. The cocked hat attached to hat band.


Paper hats – it-yourself crafts, which have been used successfully by other means available. To make a Mexican sombrero, we will need the following materials:

  • thick red paper (coated paper);
  • plastic flower pot;
  • wrapping paper;
  • decorative cord.

How to make Mexican hat out of paper? With tape, paints, rulers, scissors, compasses start manufacturing:


  1. Flower pot primed with white paint and let it dry.
  2. Put the inverted pot on the red paper, draw out the circuit.
  3. Inside draw a smaller circle and cut out.
  4. From the edge of the holes cut for the circle line make perpendicular cuts.
  5. The teeth bend upwards.
  6. Around the compass draw a line that outlines the edge of the fields sombrero.
  7. Stepping back from her inside 5 cm, draw another circle.
  8. Cut the outside line on the extra paper.
  9. From the cut edge to the drawn circle do perpendicular cuts.
  10. Bend up the teeth, together.
  11. Coloring a pot of brightly coloured horizontal stripes.
  12. Allow the paint to dry.
  13. Inside the pot on the rim glue a strip of double-sided tape.
  14. Put the crown on the field pot and glue it inside the curved teeth.
  15. Attach the strings.


The cylinder – hat universal. It is suitable for costume Dracula, frosty the Snowman, the old woman Shapoklyak. This hat with veil will be a Flirty addition to many ladies ‘ fancy dresses. The main thing is to determine the height of crown and width fields and then create myself a headpiece for a particular character. For cylinder, we will need the following materials and tools:

  • the drawing paper;
  • adhesive;
  • colored fabric (paper);
  • a pair of scissors.

How to make an elegant hat made of paper:

  1. Draw on paper a rectangle (one side is the height, second is the circumference of a crown). Cut.
  2. Glue the pipe connecting detail along the edges of the rectangle height.
  3. Put on a new sheet of drawing paper on the top of the circle.
  4. The circle draws another on the distance equal to the width of the cylinder fields of the future.
  5. Put a small hole from the inside, stepping back from the contour of the circumference half an inch.
  6. Cut out this small circle.
  7. From the edge to the drawn line the inner circle make the incisions and fold the paper to the drawn contour.
  8. Again put on a new sheet of drawing paper on the top of the circle.
  9. Cut a piece of the contour, stepping back out about half an inch for notches is the top of the crown.
  10. Do scissor cuts and fold the paper to the drawn contour.
  11. Glue the crown tube with round top.
  12. Glue the cylinder to the field (scoring applied from the inside of the cone).
  13. Glue over the hat with colored paper or fabric.
  14. Decorate at will (brooches, feathers, veiling, ribbons, etc.).

The snowman

A hat made of paper to suit the Snowman – the easiest option fancy hats, if you make the cap. Original you will get light hat of crepe paper is wrinkled and the curve of the cylinder. How to make this option a hat that we already know. Let’s try to make the cap. For its production we will need:

  • Whatman:
  • paint with brushes;
  • colored paper;
  • adhesive;
  • hat elastic band;
  • a pair of scissors.


  1. Drawing on Whatman paper circle with the radius equal to the height of the hood.
  2. Measure the volume of the head of the future Snowman.
  3. Is the number of centimeters measured along the length of the drawn circle.
  4. Put a mark in the center of the circle, the beginning and the end of the line (the volume head).
  5. From the marks on the circle to the center of the circle are two features.
  6. Cut out the resulting sector.
  7. Collapsible cone.
  8. Bonded or fastened with a stapler.
  9. Paint colors or pasted over with color paper hat for our Snowman.
  10. Attach it to the hat band.

For Know-Nothings

For hat of the dummy, we will need the following tools and materials:

  • cardboard;
  • blue (blue) fabric;
  • super glue or a stapler;
  • yellow corrugated paper;
  • hat elastic band;
  • paint or brush.


  1. On cardboard draw a circle on the volume of the future head of the dummy.
  2. Put it around a larger diameter, the distance between circles is about 20-25 cm.
  3. Cut out detail along the contour of a great circle is the brim.
  4. Put a small hole from the inside, stepping back from the contour of the circumference half an inch.
  5. Cut out this small circle.
  6. From the edge to the drawn line the inner circle make the incisions and fold the paper to the drawn contour.
  7. Draw another circle with a radius of 25-30 cm.
  8. Cut one sector, the remaining detail make a cone and glue along the edge is the crown of a hat.
  9. Glue the hat and field (notches on the fields glue on the inside of the cone).
  10. Tight hat for a cloth, securing it with a stapler, coloring or blue paint.
  11. Cut the crepe paper fringe and a collapsible brush.
  12. Attach hat elastic.
  13. Attach the thread brush.
  14. If desired, the inner side of the field draw blonde hair know-nothings.

How to make a paper

How to make hats for kids from paper using old newspaper? A light cap or hat with visor comes in several cologene, it does not need glue, scissors or any additional materials. For training you can try the technology on a standard A4 sheets, and at the same time to determine the size of future newspaper hats.


This manual will tell you how to make a paper hat from the newspaper, the Panama. For adult will need a large sheet of newspaper (tabloid, A3), will be sufficient half of a turn. Consider how to make a cap from paper, on the example of a standard A4 sheet:

  1. Fold the paper in half short sides together.
  2. Unfold it fold up.
  3. The top corners of the rectangle fold to the center and down.
  4. Smoothing the folds.
  5. Get like house with a triangular roof.
  6. Bottom long rectangular strip of free flaps folded up sheet we turn on each side, smoothing the folds.
  7. Wrap loose triangles in opposite directions, assuring in this way our paper hat.


You are not satisfied with a simple cap? Let’s learn how to make a hat from newspaper is a lightweight hat with a visor from the sun. For the manufacture of such caps, we need only a sheet of newspaper:

  1. Take a sheet of paper (A3 format), put it long side facing you.
  2. The top corners fold to the center and to itself to form a triangle.
  3. Loose bottom rectangular strip in half and fold up again exactly.
  4. Turn the hat inside out.
  5. Speakers at the edges of the triangles from the folded strip and wrap it inward (toward yourself).
  6. The right and left edge of the cap folded into the middle.
  7. Loose bottom rectangular strip to buckle up back to back with curved edges (see the previous paragraph).
  8. Formed visor, making small bends on the sides.
  9. Charged them under the cap envelope.
  10. Deployable cap bottom side facing you.
  11. Fold down the upper part of the cap, filling her up under the lapel.
  12. Straighten the hat, open it, try it.

Video: how to make a hat

The video is the best visual aid that demonstrates how it is using origami hat out of paper, for example, the cover for witches. This same technology is easy to make a newspaper hat, make the traditional Chinese headdress. The authors of the video will show you how to make a hat from paper for fancy dress mushroom Amanita or an elegant hat for a doll. See, learn, memorize the diagram.

For witches

For dolls

The mushroom hat

Hat out of newspaper

Chinese hat


Filed in: Tip

Post Comment