Regarding a possible repair and extension of balconies the process of insulating this zone in the apartment plays an important role. If you do it right, it can act as an additional room. In this case, the question is how the selection of insulation. What characteristics should he possess?
How to choose a heater on the balcony
So this choice was right, you should be familiar with the properties of each material on the market today. From a heat-insulating material directly affects the possible flow and heat saving. If you don’t want to heat the street, you should approach responsibly to question of the insulation of the balcony. The seams need a good sealant to close. After that it will be possible to start work on the insulation.
All major work must be done outside. Thanks to this cold weather here will not be condensed. In addition, the area inside the balcony will be able to save.
There are many parameters that can be guided in the selection. For insulating material are important characteristics such as:
- water vapor permeability
- the thermal conductivity
- resistance to fire
Among all these characteristics the first place in importance is the thermal conductivity. It directly indicates the ability to retain heat, characteristic of a particular material. What is meant by the density of the material? The weight that falls on each cubic metre of insulation. The design of the balcony can have different weight depending on the density of the insulator. That is why it is advisable to give preference to lighter materials, to avoid the additional load.
The heaters are presented in a huge variety in the construction market today. Which of them are suitable for thermal insulation of balcony? Here’s the list:
- mineral wool
Let’s try to describe the most common insulators.
Types of thermal insulation materials for balcony
Is a multi-layered material. Structure and thickness of polyethylene foam in it may differ. Another component that is part of it, is foil. Penofol has a relatively small thickness. She comes to a few millimeters. Thus the material can serve as an alternative to 100 millimeters of mineral wool insulation. Penofol is suitable for use on walls and ceilings, as well as on the floor. The main positive quality of a material is its ability to reflect around 97% of heat. The operating temperature of penofola a wide range. They can easily be mounted. The material is available in the construction market at a relatively low price.
Among all of the materials used for insulation of balcony is considered to be one of the best options. Is environmentally friendly. For it is characterized by a low degree of Flammability. These characteristics are very useful when staying on the first floor. The mounting material is a somewhat unusual method — sputtering. The advantage of polyurethane foam is the lack of need for additional fasteners. The material is able to harden very quickly. Well-fixed to any surface, excluding films and water.